Appendix : Trouble Shooting on Battery and Fuse
When motorized LIFT or Actuator do not functioned, please follow the steps for solutions.
1. Press the buttons on Remote Control.
2. If any LED does not flash for counter move, please replace the battery of Remote Control.
Battery Specs :
Type :
A23
Current :
12V
Q’ty:
1 pc
3. If remote control works well, but LIFT/Actuator no move at all, please replace the fuse at Fuse Box.
(see illustration drawing)
4. Please follow the steps to replace fuse.
•
Take off the power cord from socket.
•
Pull out the fuse tray.
•
Remove the existing fuse.
•
Install the new fuse.
•
Push back the fuse box.
•
Connect the power cord.
•
Repeat Step 3 to see if all moves normal.
Specs on Fuse :
Voltage : 10A, Length : 20 mm.
5. Make sure designated trouble shooting has to be conducted by qualified technician. Shall you contact your
distributor/reseller if any question remaining.
1.Duty cycle : please take rest for 18minutes
for every 2 minutes continuous operation of
the lift/ tilt mechanism.
2.Please have the panel to the lowest position
while moving the trolley.
CAUTION
TIPPING HAZARD!
DO NOT move Cart with Display in highest
position. DO NOT push Cart from front or back
of Lift. DO NOT move Cart over cords or
uneven, dirty, soft or sloping surfaces. DO
NOT move Cart by pushing on Display. Failure
to comply with this caution may result in Cart
instability leading to equipment damage or
personal injury.
11
