5.12
Climbing Upstairs
You will manage the climbing process without pro-
blems and in next to not time, if you follow instruc-
tions closely. At first you should practice climbing
stairs up and down with the
CargoMaster
without
loads to get familiar with the device and how it
works.
1.
To climb stairs, drive with the
CargoMaster
backwards toward the stairs and climb 2 to 3 steps.
Please make sure that the
CargoMaster
´s big wheels
are touching the edge of the lowest step as shown on
the picture.
F
During the entire climbing process, always pull the
CargoMaster
slightly backwards towards you, i.e.
keep the device always under tensible force.
2.
Push the UP/DOWN-switch to "
UP
" initiating
the climbing process. The motor and the lifting le-
vers begin to rotate and uplift the frame plus load.
F
Imitate this powered climbing process of the frame with your arms and consequently with the handle-
bars. Hereby you keep the
CargoMaster
in a sufficiently steep angle so that the supporting wheels can
touch down on the next higher step.
3.
The climbing process takes place in two sec-
tions per step. The first section is finished when the
small supporting wheels touch down on the next
step and take over the load from the big wheels.
18
CargoMaster
