background image

10

Warranty and Liability

10.1

Warranty

AAT Alber Antriebstechnik GmbH assumes the warranty of their
products type

CargoMaster

and all accessory parts, with the ex-

ception of the lead batteries, for the time period of one year starting
with the date you receive your device. During that time AAT Alber
Antriebstechnik GmbH guarantees that the above listed products
(with the exception of the lead batteries) are free of material dama-
ges or processing defects.

For the lead batteries, provided that they receive the appropriate
care, AAT Alber Antriebstechnik GmbH takes over the warranty for
the time period of six months from the time you receive them.

The warranty of the

CargoMaster

does not include faults or defects

caused by:

l

Insufficient or inappropriate maintenance on the
part of the customer.

l

Unapproved changes or inappropriate use of the

CargoMaster

.

l

Using the

CargoMaster

while exceeding the

maximum load it is approved to transport.

l

Charging of the lead batteries other than described
in chapter 8.2.

10.2

Liability

AAT Alber Antriebstechnik GmbH as the manufacturer of the

Car-

goMaster

is not liable for potential damages if:

l

The

CargoMaster

is handled carelessly and

unskillfully;

l

repairs or assembly were not performed by
authorized persons only;

l

the

CargoMaster

was not handled and used

according to this user´s manual;

l

third party parts were attached to or connected with
the

CargoMaster;

l

any parts of the

CargoMaster

were removed;

l

the

CargoMaster

will be loaded with more than the

specified maximum charge.

30

CargoMaster

Содержание CargoMaster A 310
































Отзывы: