AAT c-max U1 C1414 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 36

AAT c-max U1 C1414 Скачать руководство пользователя страница 14

14

5 Assembly

5.1 Handle unit and C-part with seat

DANGER - Lock the handle unit and c-part safely, otherwise parts may move involuntarily!

Tighten the locking screws!

WARNING - Special care must be taken to avoid crushing or pinching of body parts while assembling.

Attach the back rest to the

chassis by putting it onto the

guide pins on top of the chas-

sis

. Insert the tightening

knobs .

Attach the C-part plus seat

to the chassis.

» The tightening screws of

the C-part

fit into the

corresponding holes in the

frame.

» Make sure that the back

rest is securely fastened.

Affix the back rest.

» Secure both tightening

screws by turning them

clockwise.

» Make sure that the back

rest is securely fastened.

5.2 Assemble the head rest (optional accessory)

CAUTION - To ensure head stability, we recommend placing the head rest at the back of the

occupant‘s head!

Place the bracket of the head
rest above the marks.

» Mount the head rest on the

back rest using the screws.

Adjust the height of the head
rest to the head height of the
occupant.

» Secure with the locking

screw.

«
...
12
13
14
15
16
...
»

Содержание c-max U1 C1414





































Отзывы:

Нет отзывов