Aastra S850i Скачать руководство пользователя | Manualshive

Страница: 71 / 101

background image

Web Interface

41-001516-00 REV00 – 06.2013

71

SIP Registration

The SIP Registration page is used to configure the SIP registrar and proxy settings and the SIP account and user settings for
the phone. The minimum number of information required to register your phone is the Registrar, the Username and Pass-
word. If ID and Display Name are not set, S850i will use the user name for both of these parameters. Some SIP Call Servers
require an ID different from the user name to be set. You must register successfully to the SIP registrar before you can make
calls with your S850i.

The figure below shows the SIP Registration page. After changing any settings, the changes must be saved and the phone
must be restarted for the changes to take effect.

VLAN Settings

Voice VLAN

The options are Enabled, Disabled, or Automatic.

•

“Enabled” indicates that a VLAN is used. The Voice VLAN ID has to be specified, the system is not trying to determine
the VLAN automatically. Use this setting if the S850i was not able to detect the VLAN environment automatically.

•

“Disabled” switches off VLAN capabilities. The S850i will only communicate using the standard IP network.

•

“Automatic” should be used in environments that provide a Voice VLAN with automatic detection. The S850i will
determine the VLAN identifier and register in that network.

Voice VLAN ID

Manually specify a VLAN identifier. This setting requires the Voice VLAN selector to be “Enabled”.

NTP Servers

Server 1 - Server 4

Specifies the IP addresses of NTP (Network Time Protocol) servers. The S850i will provide standard NTP servers at start
up. If local NTP servers or other NTP servers should be used, provide them in these settings.

«
...
69
70
71
72
73
...
»

Содержание S850i






































































































Отзывы:

Нет отзывов

Похожие инструкции для S850i

Бренд: 2N Страницы: 8

Бренд: 2N Страницы: 83

Memoir SGH t929

Бренд: Samsung Страницы: 200

Бренд: HTC Страницы: 80

Бренд: switel Страницы: 4

Бренд: Wiko Страницы: 56

Бренд: mPTech Страницы: 50

Бренд: Sonim Страницы: 1

Бренд: Pantech Страницы: 66

Бренд: Planet Страницы: 51

Бренд: PASCO Страницы: 2

Бренд: SSS Siedle Страницы: 14

Бренд: OUKITEL Страницы: 60

SPH-A580 Series

Бренд: Samsung Страницы: 156

Бренд: Samsung Страницы: 156

Бренд: Samsung Страницы: 153

Бренд: Samsung Страницы: 156

Бренд: Samsung Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды