Web Interface
66
41-001516-00 REV00 – 06.2013
Audio
The Audio page can be used to configure audio settings and audio mixer settings of your S850i. These settings are also
available on the Handset. The figure below shows the Audio page, followed by a description of each setting. After chang-
ing any of the settings, click Save to save the settings. If you navigate away from any of the web pages without saving
settings, the changes on that page will be lost.
Audio
Ringer Volume
Choose the Speaker volume for the ring tone played when the phone receives an incoming call. This setting is separate
from call volume, which is set form the Handset while in a call. The range of values is 0-16.
Ring Tone
Select from one of the six provided ring tones, Ring 1-Ring 6.
EQ Setting
The Equalizer setting allows you to adjust the Speaker frequencies to your preference for the room and the types of
calls. The EQ options are: Voice, Bass Boost, and Treble Boost.
Play Charging Announce-
ment
Enable/Disable playing the message reminding users to return the components to the charger tray after a conference
call.
Audio Mixer (The settings below can be changed at any time during a call)
Speaker Mix
The Speaker Mixer specifies the mix between AUX IN and the phone input to be played back on the Speaker. It is a slid-
ing scale from -8 (favoring phone) to +8 (favoring AUX IN).
Phone Out Mix
The Speaker Mixer specifies the mix between the Microphones and AUX IN to be transmitted to the far end during a
call. It is a sliding scale from -8 (favoring Microphones) to +8 (favoring AUX IN).
Aux Out Mix
The Aux Out Mixer specifies the mix between the Microphones and the phone audio received from the far end while in
a call. It is a sliding scale from -8 (favoring Microphones) to +8 (favoring phone).
