Page
81
01/2007
AMT/PTD/PBX/0062/1/2EN
♦
Using the interactive keys, successively select “
Menu/Local mode
and press OK.
♦
♦
♦
♦
♦
♦
♦
♦
♦
Select “System” (just to highlight it).
Enter the key sequence: ***76#
Select Auto Answer.
Press OK.
Enter a number of seconds during which the phone shall ring before answering the call.
Press OK.
Enter a number of seconds during which a call must be active. Press OK. The test will
be started automatically.
To stop the test, switch the phone off and on again.
6.1.2.4 SYSLOG
The OpenMobility Manager and the RFPs are capable of broadcasting Syslog messages
according to document
. This feature, together with the IP address of a host collecting these
messages, can be configured.
Syslog must be enabled via:
DHCP using the public options 227 and 228
By setting the syslog daemon server and port via the web interface.
The advantage of configuring syslog via DHCP or OM Configurator is that syslog messages are
available at the early stage of RFP start-up.
The level of syslog messages by default allows the user to have control over the general system
state and major failures. If you wish to increase the level for diagnosis reasons, you can do so via
the telnet user shell by increasing the SPY level of each subsystem.
