Page
75
01/2007
AMT/PTD/PBX/0062/1/2EN
Next, the defined trace options (Event Mask) are sent to the OMM. The options sent to the OMM
are always those which were active the last time the application was exited.
If the trace option ‘Transaction establish/release’ is activated, the OMM will deliver all existing
transactions.
Thereafter, the OMM system delivers the desired trace data. The user can either communicate
with the application interactively (see below) or he can simply activate a log file in which to record
the data.
After this initialization, the user can make the following modifications:
♦
♦
♦
♦
♦
♦
♦
The trace settings can be modified using the menu item ‘Options-Event Mask’.
Transmissions to the OMM take place after confirming the settings with ‘OK’.
A ‘Config Request’ can be sent again to the OMM.
A log file can be activated.
Through various dialogues, the configuration data of the PPs, RFPs and control modules
can be displayed and stored in ASCII files.
The following information is displayed in the tables dynamically:
Transactions between PP and PBX system. They are displayed in all the tables. Simple
transactions are displayed in black on a white background;
during handover, both transactions involved are displayed in white on a red background.
The Location Registration and Detach events are displayed in the tables for
approximately 1 – 2 seconds after their occurrence (light green background), if possible.
There is no display in the RFP table if there is no column free for display. If the event
has already been displayed, it can be overwritten at any time. The events are not
displayed if they occur during an on-going transaction. Whether or not the events are
