Page
32
01/2007
AMT/PTD/PBX/0062/1/2EN
3.13.2 CONFIGURING AN M92X MOBILE TERMINAL
3.13.2.1 REGISTERING AN M92X MOBILE TERMINAL
PRELIMINARY OPERATIONS
Check that the handset is not already registered. To cancel the previous registration,
refer to the section “Cancelling the registration of an M92xx portable handset”
Check that the handset has been declared on the OMM interface (see the section
“Portable Parts”).
Check that the registration of the handset is authorised on the OMM interface
(Portable Part/Registration).
The portable handset must not contain any "parasite" registrations (for example, from
previous use on another DECT system). In the standard case where the handset is to be
used on one DECT system only, it must not be registered on any other base at the
outset.
•
At startup, if the handset displays:
Declare
base number ?
1 2 3 4 5 6 7 8
OK
it is not currently registered on any other base. Press the OK key
and proceed to step 7 under paragraph B).
If the mobile displays:
Mobile
Out of range
Redial
Menu
it is already registered on at least one other base.
1.
2.
3.
1.
2.
3.
4.
5.
Press the
Menu
key.
Press the middle key. "
Select base
" is displayed
Press the
Select base
key.
•
Any base numbers already in use are displayed. If they are used unduly, they must be
de-registered on the handset
Erreur ! Aucun nom n'a été donné au signet.
.
A. Register the cordless handset on a base
Press the
Menu
key.
Enter the installer code 9995.
Press the middle or key several times until "Declare base" is displayed
Press the Declare base key.
The handset display shows:
