background image

BATTERY SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL
INJURY, READ AND FOLLOW THESE INSTRUCTIONS.

1. Use only the following type and size of batteries: 3 size "AA" alkaline

batteries.

2. Do not dispose the batteries into a fire. The cells may explode. Check

with local codes for possible special disposal instructions.

3. Do not open or mutilate the batteries. Released electrolyte is corrosive

and  may  cause  damage  to  the  eyes  or  skin.  It  may  be  toxic  if  swal-
lowed.

4. Be careful when handling batteries in order not to short the battery with

conducting materials such as rings, bracelets and keys. The battery or
conductor may over heat and cause burns.

5. Do not attempt to recharge the batteries that are used with this product.

The batteries may leak corrosive electrolyte or explode.

6.  Do  not  attempt  to  rejuvenate  the  batteries  identified  for  use  with  this

product by heating them. Sudden release of the battery electrolyte may
cause burns or irritation to eyes or skin.

7. All batteries should be replaced at the same time. Mixing fresh and dis-

charged batteries could increase internal cell pressure and rupture the
batteries.

8. When inserting batteries into this product, the proper polarity or direc-

tion must be observed. Reverse insertion of batteries may result in the
leakage or explosion.

9. Remove the batteries from this product if the product will not be used

for a long period of time (several months or more) since during this time
the batteries could leak, damaging the product.

10.  Discard  weak  or  dead  batteries  as  soon  as  possible  since  they  are

more  likely  to  leak  in  the  product.  Batteries  should  be  replaced  when
the display gets dim or if the LOW BATTERY INDICATOR shows.

11. Do not store this product in high temperature areas. Batteries that are

stored in a freezer or refrigerator for the purpose of extending shelf life
should be protected from condensation during storage and defrosting.
Batteries  should  be  stabilized  at  room  temperature  prior  to  use  after
cold storage.

12. If this product does not operate normally, see TROUBLE SHOOTING

on pages 14 and 16. Opening or removing covers may expose you to
dangerous  voltages  or  other  risks.  Incorrect  reassembly  can  cause
electric shock when the appliance is subsequently used.

13. Installation of batteries should only done by an adult.

17

Содержание 2012J





















Отзывы: