MEMORY DIALING
You can quickly dial the numbers you stored into the 3 one-
touch speed dial buttons or 10 two-touch speed dial memories.
Storing Phone Number into Memory
1. Press the STORE button.
P
Pr
ro
o
(short for programming) appears on
the display.
2. Dial the phone number you want to store. You can store up to 22
digits, including a TONE ( ) and a PAUSE (REDIAL), each of
which is counted as one digit.
The stored number and the location will show in the display.
4. Press the STORE button, or wait 3 seconds to resume normal
display.
5. Repeat steps 1-4 to store numbers into other memory locations.
NOTE:
When the batteries are dead or removed for more than 5 min-
utes, the stored numbers may be erased.
TIP:
If you entered a wrong number, you may press the STORE
button, then start from the beginning.
TO STORE A NUMBER TO BE DIALED VIA PRIVATE
BRANCH EXCHANGE (PBX)
Before entering a phone number in Step 2 in Storing phone
number into memory, do as follows:
1. Enter the outside line access digit (e.g., 9).
2. Press the REDIAL button (for a pause).
TO CHANGE A STORED NUMBER
Just store a new number, as described above, the old one
will be erased automatically.
7
3. For one-touch dialing:
Press one of the 3 one-
touch speed dial but-
tons (M1 to M3).
For two-touch dialing:
Press the MEMO button, and the
press one of the dialing keys (0 to 9)
to store a phone number in.
