background image

GUARANTEE 

Page 48 

Aarrow Sherborne GSL CF 

Your Aarrow Sherborne GSL stove carries a 

LIFETIME

* guarantee against defects to the 

stove body. 
All other components carry a guarantee period of 

ONE

 year from the date of purchase. 

This does not apply to items which would be subject to fair wear or tear. However, should you 
have any problems with your appliance, please contact your Aarrow stove stockist who will 
have the knowledge and facilities to help you. 
 

LIFETIME

 guarantee, meaning the stove body, being defined as the steel outer casing and 

items fixed immovably to the casing. 

 
Arada Ltd, will not be responsible for any consequential or incidental loss, damage, or 
injury, however caused. If your appliance proves to be defective as a result of faulty 
materials or workmanship, during the guarantee, we will repair or replace it FREE OF 
CHARGE as long as the stove has been installed according to these instructions and 
by a CORGI registered fitter, who has completed and signed the installation check list 
on page 29. The stove must be serviced in accordance with these instructions and the 
record of annual service on page 34, should be completed by your service engineer. 
 
USE OF SPARE PARTS OTHER THAN THOSE SUPPLIED BY ARADA LTD (AARROW) 
WILL INVALIDATE THE APPLIANCE WARRANTY. 
 

All guarantee periods commence on the date of purchase and are non-transferable. 
Our guarantee is offered as an addition to your statutory rights. 
Guarantee applicable to original purchaser only. Not transferable. 
The manufactures decision shall be final. 
The installation and operating manual gives sufficient details to enable the appliance to be  
installed and maintained. If further information is required, please contact your local stockist 
who will be pleased to help, or you can call our technical support number 

0844 847 5107.

 

 
When you contact them, they will need to know: 
1) 

Your name, address, post code and telephone number. 

2) 

Date of purchase and supplier details. 

3) 

Name of installer. 

4) 

Stove serial number, this can be found on the data plate badge. 

5) 

Clear and concise details of the fault. 

 

Please complete the following for you own records. 

Date Of Purchase ……………………………… Model ………………………………. Serial No…………………………..

 

 

Name & Address Of Supplier …………………………………………………………………………………………………...
………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………

 

 

Name & Address Of Installer …………………………………………………………………………………………………...
………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………

 

Содержание BK047



















































Отзывы: