Aardvark Direct Pro Q10, Руководство пользователя

Страница: 60 / 64

CUBASE™ SX/SL & NUENDO™
PROBLEM: If you select the Q10 control panel or another program
while playing audio, the program stops playing.
SOLUTION: Go to DEVICES | DEVICE SETUP | select VST
MULTITRACK. Make sure there is no checkmark in RELEASE ASIO
DRIVER IN BACKGROUND
PROBLEM: A message appears in claiming the Q10 does not support
24 bit audio.
SOLUTION: Go to the Q10 control panel, select ADVANCED, then the
ASIO and DIRECT X tab. Make sure the ASIO SAMPLE SIZE is set to
24 bit.
PROBLEM: Tracks are playing faster/slower than they are supposed to
SOLUTION: Be sure the sample rate for your project matches the
sample rate on the Q10. A sample rate mismatch can make audio play
at the incorrect speed and pitch.
PROBLEM: The program does not see every Q10 input
SOLUTION: Go to DEVICES | VST INPUTS, and make sure all Q10
inputs are enabled
WAVELAB™
PROBLEM: Wavelab does not allow 24 bit recording
SOLUTION: Wavelab supports two 24 bit formats, “24 bit” and “24 bit
alt” To use 24 bit with the Q10, you need to choose “ 24 bit alt”
REASON™ / REAKTOR™
AMD SIMILAR SOFT SYNTHS:
PROBLEM: There are clicks & Pops in playback
SOLUTION: First, be sure the program is configured to use ASIO, as
opposed to DirectSound or other driver models.
You may need to boost the ASIO buffer size. To do this, go to the
Q10 control panel, click ADVANCED, go to the ASIO and
DIRECTX tab, and use the slider to boost the ASIO buffer
Q10
SUPPORT
TROUBLESHOOTING
SOFTWARE SPECIFIC ISSUES
PAGE
5 5
5 5
DIRECT PRO Q10
O W N E R S M A N U A L