Aardvark Direct Pro Q10, Руководство пользователя

Страница: 43 / 64

How to set up Sonar 3.x:
Go to OPTIONS | AUDIO | ADVANCED (tab). In the "Driver Mode"
dropdown menu, select ASIO. Click OK and restart Sonar.
(please note, it is also possible to select MME (32 bit) instead of ASIO.
ASIO has provided the best results for most users, but you may want
to try both, to see which works best in your setup). If you choose
MME (32 bit, set the DRIVER PROFILES to the settings listed for Sonar
2.1 and prior)
Go to OPTIONS | AUDIO | again
On the GENERAL tab:
· Set the playback and record timing master to Channels 9,10 of the
Q10.
· Sample Rate bit depth, and other settings on this tab can be set to
whatever you prefer
On the ADVANCED tab:
· Do not put checkmarks in ENABLE READ CACHING or ENABLE
WRITE CACHING
· Set I/O BUFFER SIZE to 128
· Driver mode should still say ASIO
· All other settings can be set to what you prefer.
On the DRIVERS tab:
· This allows you to select which Aardvark inputs/outputs are seen by
SONAR. Unless you plan on using additional audio programs while
Sonar is running, simply highlight every Aardvark channel listed.
Click OK, then restart Sonar to complete the setup
Q10
SOFTWARE
CAKEWALK SONAR™ &
SONIC FOUNDRY ACID™/VEGAS™ QUICKSTART
PAGE
3 8
3 8
DIRECT PRO Q10
O W N E R S M A N U A L