Aardvark Direct Pro Q10, Руководство пользователя

Страница: 21 / 64

Q10
REAR PANEL
ANALOG OUTPUTS
Q10
REAR PANEL
MONITOR OUTPUTS
The Q10 has eight stereo output pairs on the back of the interface box.
Although these outputs can be used in many ways by tweaking the
Q10 software, Outputs 1-8 are typically used if you want to send tracks
to separate outputs, allowing you to use a hardware mixer, or add
external effects.
The Q10 also has a monitor output pair on the back of the interface box.
Although the monitor outputs can be used in many ways, Monitor L
and Monitor R are commonly used to listen to the full mix of your
project. In the control panel, these should be set to Monitor L and
Monitor R. This way you can use these as the main outputs that allow
you to monitor incoming signals, as well as previously recorded tracks.
The volume of these outputs can be adjusted with the Monitor Volume
Knob on the front of the Q10 (discussed earlier).
PAGE
1 6
1 6
DIRECT PRO Q10
O W N E R S M A N U A L