manualshive.com logo in svg

AAQ AutoLift AL-243156, Руководство по установке и инструкции по эксплуатации

Поделиться
Скачать
AAQ AutoLift AL-243156 Скачать руководство пользователя страница 3

‐    ‐ 

3

1. Safety Information

1.1 Note, Caution and Warning 

This document uses the following conventions—Note, Caution and Warning – to alert you to 

special instructions, tips, or hazards for a given procedure. Please familiarize yourself with the 

conventions described below. 

Indicates important information that requires special attention, such as a procedure 

for a specific vehicle, or tips on operating the equipment.   

Indicates the potential for damage to equipment, accessories, or the vehicle unless 

you follow the instructions or procedure exactly.   

Indicates the potential for property damage, personal injury, or death due to hazards 

associated with the equipment, vehicle, or environment. Do no perform any 

procedure until you have read and understood the warning instructions. 

1.2 Important Information 

1.

Carefully read this manual thoroughly before installing, operating, or maintaining this

hoist

.

2.

This 

hoist

 is designed for indoor use only, and should not be installed in a pit or

depression.

3.

The lifts have specific electrical requirements as described in the Installation Instructions

section of this manual.

4.

This 

hoist

 has a minimum ceiling height requirement as described in the Installation

Instructions section of this manual.

5.

Failure by the owner to provide the 

recommended shelter, mounting surface,

electrical supply, and ceiling height

 could result in unsatisfactory 

hoist

 performance,

property damage, or personal injury.

6.

The operation of the 

hoist

 is permitted by authorized person only.

7.

Keep this guide as well as all the supplied technical literature in a safe place close to the

hoist

 so that operators are able to read it whenever necessary.

8.

If any confusion, please contact the service provider or your distributor.

Содержание AutoLift AL-243156







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды