A&S Neatsvor V390, Руководство пользователя

Страница: 27 / 32

6.1 Faults Description
Faults
The robot can
not be charged.
The robot is
stuck during
work.
The robot goes
back to recharge
without finishing
the cleaning
work.
The robot does
not perform
cleaning work
automatically
as scheduled
Remote control
malfunctions
(effective range
is 16.3ft)
Possible Reasons
The electrodes between the main body
and the charging base are not contacted
properly.
The charging base is switched off while
the robot is switched on,which leads to
the loss of power.
The robot may be stuck by wires/cables
on the ground,hanging curtains or
obstacles around the carpets.
The robot detects that the power may
be not enough and automatically goes
back to recharge.
The robot is not switched on and the
robot can not perform cleaning work
as scheduled when it is powered off.
The power level of the robot is too low
to work.
The remote controller is short of or out
of power.
The robot is short of or out of power.
The infrared ray is blocked because the
infrared emitter on the remote
controller or the infrared receiver in
the robot is contaminated.
Interference emitted by other devices
that exist nearby.
Solutions
Make sure that the electrodes between
the main body and the charging base
are properly contacted.
Keep charging the robot when it is not
working to better prepare for next
cleaning assignment.
The robot will try to get itself out
automatically.However,please help
it manually if it failed.
Charge the robot.
Turn on the robot.
Keep charging the robot when it is not
working to better prepare for next
cleaning assignment.
Change the batteries and install the
batteries correctly.
Make sure that the robot is switched
on with enough power for operation.
Wipe the infrared emitter on the remote
controller or the infrared receiver on the
robot with a clean cotton cloth.
Avoid using the remote controller near
other infrared devices.
The robot works at different speeds on
different floor types.For example,it
works longer on the wood floors than
on carpets
The length of working time varies
because of the complexities of room
environments,the amount of garbage
and different cleaning modes.
The robot is stuck or twined by obstacles.
Turn off the robot and clean the dust
box.Then turn over the robot to clean
its components,such as wheels and
side brushes.
Common Faults