A&S Neatsvor V390, Руководство пользователя

Страница: 18 / 32

Switching Modes
Standby Mode：
The power is turned on, the indicator light flashes green, and the robot is standby.
Sleep Mode：
The power is turned on, Control button is off, and the robot is at rest.
Working Mode：
The robot is working; indicator light is in green all the time, enter cleaning mode.
Operating procedure：
Sleep mode-Standby mode-Working mode
Startup：
01.Make sure the power switch on the side of the robot is turned on.
02.Press the Control button or the Cleaning mode on the remote controller to start the robot.
Pause：
The pause function is to switch the robot from the operating mode to the selected mode,and the robot
can be paused by the following operations:
01.Press the Control button on the robot to pause the robot.
02.Press the power on/off button on the remote controller to pause the robot.
Sleep：
Sleep mode means that the robot is stopped and the indicator light is off.
If the Robot is not active within 10 minutes,the robot will enter Sleep mode automatically.
Note: If the robot is out of service for a long time,pls turn off the power switch.
Instruction for Use