Page 38
Aanderaa Data Instruments AS – TD302
CHAPTER 6
Sensor configuration using AADI Real-Time Collector
The sensors that are updated with Sensor Framework version 3 can be configured as stand-alone sensors using AADI
Real-Time Collector.
Open the sensor connection as described in TD268 AADI Real-Time collector operating manual.
When the connection is established you can start and stop recordings or configure the device, refer
Open Device Configuration and press
Get Current Configuration
. Check
Include User Maintenance
to view
maintenance settings.
The password is 1000
.
Figure 6-1 AADI Real-Time Collector screen views
User accessible sensor properties are found in Deployment settings, System Configuration and User Maintenance.
Refer Table 1-2, Table 1-3 and Table 1-4 in chapter 1 for an overview of the properties and the chapter 1 text for a
description of sensor properties. To edit the configuration, click in the value-field and enter new value. Press
Next
to
update sensor flash and store changes.
Figure 6-2, Figure 6-3, Figure 6-4 and Figure 6-5present screen views of AADI Real-Time Collector.
Note! These screen shots might show minor discrepancies compared to screen shots taken from your sensor due to
sensor updates.
