Page 16
Aanderaa Data Instruments AS – TD302
1.5.2
Additional sensor properties for Tide Sensor 5217/5217R
Most user accessible properties of the Tide sensor are the same properties as for the Pressure sensor, refer
Table 1-2. Additional sensor properties are listed in Table 1–3.
Table 1-3 Additional sensor properties for Tide sensor, SC = System Configuration, DS = Deployment Setting.
ENUM=Enumeration, INT =Integer, BOOL=Boolean(‘yes’/’no’)
Property
Type
N
o o
f el
em
en
ts
Use
Co
nf
igur
ati
on
Ca
te
go
ry
Acc
es
s P
rot
ec
tion
R
S232/
422 a
pp
lic
ati
on
s
Air Pressure
Float
1
Nominal air pressure
DS
No
Local gravity
Float
1
Set the local gravity
Salinity
Float
1
Set the salinity at the deployment site
Installation Depth
Float
1
Installation depth in meter relative to chosen datum, by
default set to zero = instrument referred
DS
Low
Enable Tide
BOOL
1
Enable Tide output parameters
SC
Low
Tidal Average Period
ENUM
1
Set the averaging interval for the tide measurements (10 s, 20
s, 30 s, 40 s, 50 s, 1 min, 2 min, 3 min, 4 min, 5 min, 6 min, 7
min, 8 min)
Enable high sample rate
BOOL
1
Set the sample rate to 4 Hz
