A&D Weighing Indicator AD-4405, Инструкция по эксплуатации

Страница: 49 / 80

AD-4405 Weighing Indicator
Page 47
ENTER
key..............The key to register the unit weight and return to the piece
count display. The unit weight is calculated automatically
with the weight and the number of samples.
Press the
ESC
key while pressing
+/-
key
The key to return to the piece count display without changing
the unit weight.
Notes It is preferable to have a large number of samples, to minimize the
counting error.
Press the
ENTER
key after the STABLE mark turns on.
If the total weight of the samples is too light and is not adequate to be
used as the unit weight,
loUt loUt loUt loUt
is displayed for 2 seconds and returns
to the registration display.
Digital input
When the unit weight is already known, digital input is available.
Step 1 Start with the normal weight mode.
Step 2 Press the
SAMPLE
key to enter the digital input of the unit the weight.
U
xxx and
the weight unit is displayed with unit
pcs pcs pcs pcs
blinking. Using following keys:
0
-
9
key..................The key to set the unit weight. Maximum is 5 digits.
+/-
key .....................The key to select the weighing unit of the unit weight.
ZERO
key................The key to clear the digital input.
U----
is displayed.
ESC
key ..................The key to return to the normal weight display without
changing the registered unit weight.
ENTER
key..............The key to register the unit weight and return to the normal
weight display.
Press the
MODE
key while pressing the
+/-
key The key to shift the decimal point.
12. Counting Function