A&D UM-102, Инструкция по эксплуатации

Страница: 11 / 21

English 9
6. Using the Monitor
Installing / Changing the Batteries
1. Remove the battery cover.
2. Insert a new set of batteries into the battery
compartment as shown. Make sure the polarities
(
+
) and (
-
) are correct. Use only LR6, AA or
equivalent batteries.
3. Close the battery cover.
CAUTION
Insert the batteries in the battery compartment.
If not, the device will not work.
When (LOW BATTERY mark) blinks in the LCD display, replace all
batteries with new ones. Do not mix old and new batteries. It may shorten
the battery life, or cause the device to malfunction.
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Only the specified batteries should be used with this device. The batteries
provided with the device are for testing the device performance and may
have a limited life.
Remove the batteries from the device and store them separately if the
device will not be used for a month or more. Otherwise, the batteries may
degrade.
Connecting the Air Hose
Insert the air hose into the cuff connector firmly.
Connecting the Connector and Plug for the Cuff
(Sold separately)
1. Insert the air hose socket into the cuff connector.