A&D GXA-25, Инструкция по эксплуатации

Страница: 9 / 16

7
２．
Function Settings of the Balance
The function table stores parameters that specify how to operate the balance, and it is used to
mointor or update those parameters. These parameters are stored in memory even if the AC adaptor
is removed and are retained until overwritten. Balance operations are specified by this table when
using the GXA-25. The table menu consists of two layers as shown in the diagram below. The first
layer is the “
Class
” and the second layer is the “
Item
”. Each item stores a "
parameter
". The last
displayed parameter is in effect. After the PRINT key is pressed, these updated parameters are
applied to operations of the balance.
Example of settings and menu structure
「データメモリ機能」を「計
「インターバル時間」を「１分毎」に設定する例。
Note: There are cases when operations cannot be made properly depending on settings and use conditions
(use environment). Carefully confirm the contents to be changed before changing them.
2.1. Display for function settings and operation keys
The
〇
indicates that the parameter displayed is in effect.
Enters the function table when pressed and held in the weighing mode.
Selects the class or item in the function table.
Changes the parameter.
Moves to an item in the class when a class is displayed.
Stores the new parameter and displays the next class when an item is displayed.
Cancels new parameter and displays the next class when an item is displayed.
Exits the function table and returns to the weighing mode when a class is displayed.
The following example is when “External input connector
(AX-SW137-REZERO)” is set to the ION key.
ion fnc
lon
3
Press
twice
Press one time
exrR
C5in
Items
“Functions for the external input
connector”
Parameters
Items
Ends and enters
weighing mode
Starts and enters
weighing mode
Press and
hold
Press
several
times
Class