A&D AD-8551R Скачать руководство пользователя страница 2

Страница: 2 / 33

This manual and Marks

All safety messages are identified by the following, “WARNING” or

“CAUTION”, of ANSI Z535.4 (American National Standard Institute: Product

Safety Signs and Labels). The meanings are as follows:

WARNING

A potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION

A potentially hazardous situation which, if not avoided,

may result in minor or moderate injury.

This is a hazard alert mark.

This manual is subject to change without notice, at any time, to improve the

product.

The contents of the product specifications and this manual are subject to

change without any obligation on the part of the manufacturer.

Under the copyright laws, the software (program) described in this manual is

The software may be installed into one computer and may not be installed

into other computers without the prior written consent of A&D Company,

Limited. Copying includes translation into another language, reproduction,

conversion, photocopy and offer or loan to another person.

2019

No part of this publication may be reproduced, transmitted, transcribed, or
translated into any language in any form by any means without the written
permission of A&D Company, Limited.

Содержание AD-8551R


































Результаты поиска

Содержание AD-8551R

Отзывы:

Бренды по названию

Популярные бренды

A&D AD-8551R, Инструкция по эксплуатации

Результаты поиска

Содержание AD-8551R

Отзывы:

Бренды по названию

Популярные бренды