A&D AD-4329A, Инструкция по эксплуатации

Страница: 10 / 56

Page 8
AD-4329A Weighing Indicator
4. Description of Panels and symbols
4.1.1. Front Panel Description
No. Name Description
1 Standby indicator
The indicator lights at the standby state. This state means
connecting the power cord and turning the display off.
2 Data display Weighing data is displayed.
3 Weighing unit A unit selected in the CF functions.
The
marks indicate kind of data and weighing state.
M+ It lights when there is accumulation data.
It is blinking when displaying accumulation data.
MD The motion detection mark.
It lights when motion is detected.
It turns off while data is stabilized.
GROSS It lights when displaying gross data.
NET
It lights when displaying net data.
PT It lights while entering a preset tare parameter.
4 State indicator
ZERO It lights when displaying zero.
5 CAL cover Calibration protection cover.
6 CAL key
Calibration key. The key to adjust the scale so that mass
value is displayed correctly and to enter the CF functions.
7 Operate/Standby key The key to turn the display on or off.
8 Preset tare key The key to enter preset tare setting mode.
9 M+ (Accumulation) key
The key for the accumulation function.
Refer to "8. Accumulation", CF11, F4 and F5.
10 Mode key
The key for the accumulation function and calibration.
The key to select a unit of lb or kg.
Net/Gross key The key to select net or gross.
11
+/- key The key to set the polarity of data while in the setting mode.
Zero key The key to zero a current display.
12
key The key to select a figure while in the setting mode.
Tare key The key to perform tare.
13
key The key to select a value while in the setting mode.
Print key The key to output data. 14
Enter key, key The key to store current data while in the setting mode.
4. Description of Panels and symbols
1 2 3 3
4
5
6 7 8 9 10 11 12 13 14