AAMP Global M2M IN MOTION DCRCAM1 Скачать руководство пользователя страница 3

4.

email | [email protected] 

tel | 727-732-2727

OPTIONAL INSTALLATION ACCESSORY

• AHRHW (*required for hardwire installations)

WHAT’S INCLUDED:

+ DCRCAM1 Camera
+ FM activation support card
+ Adhesive mount
+ Adhesive cable clips

+ OBDII cable
+ Micro SD card (256 GB)
+ Allen key
+ Alcohol cleaning wipe

1. After inserting the SD & SIM card 
into the camera’s small slot as seen 
below

2. Use the Allen Key and

 two small 

screws  provided to add the securi-

ty cover plate

SIM/SD CARD INFORMATION

INSTALLATION DETAILS

• Select the location to mount the camera, is it recommended that the 
camera be mounted in the center of the windshield behind the rearview 
mirror with the camera lens facing forward or in the center of the vehicles’ 
dashboard.
• Clean the pre-selected mounting location with the Alcohol prep wipe 
provided. 
• Remove the 3M camera mounting adhesive backing. 

• The SIM cards are pre-installed and activated.
• The 256 GB SD cards are shipped separately in the camera box you will need 
to insert the provided SD card into DCRCCAM1. 
* The SD card slot is located on the bottom right hand side of DCRCAM1

Содержание M2M IN MOTION DCRCAM1









Отзывы: