9
Installation Guide
phone - 1-800-477-2267
email - [email protected]
Wiring Diagram
Operating Guide
System will become engaged when vehicle is put into reverse. The system should beep one time
when reverse is activated to notify the driver that it is on and working. Once an object is detected
within the range, the system will alert the driver via audible tone or visual indicator (if using the
display).
NOTE:
If using optional display (PA-DISPLAY)
connect to main harness in place
of speaker
Distance
Awareness
Display/Alarm Sound
<12”/ <0.3m
Danger
-P- (STOP)/Beep (Biiiiiiiiiiiiiiiiiii)
12” – 19”/ 0.3-0.5m
Danger
Inches/Bi. Bi
19” – 27”/ 0.5-0.7m
Caution
Inches/Bi.. Bi
27” – 35”/ 0.7-0.9m
Caution
Inches/Bi… Bi
35” – 47” / 0.9-1.2m
Safety
Inches/Bi…. Bi
47” – 67” / 1.2-1.7m
Safety
Inches/Bi….. Bi
>67” / >1.7m
Outside
Inches (up to 98”)/None
NOTE -
The chart reflects the default zone range. Performance may be affected by the following:
Heavy rain, loose gravel/bumpy road, steep slopes, flat/smooth surfaces. Keep sensor surface
free of snow, ice, mud, etc.
PS-TRUCK30
ParkAlert Digital Rear Sensing System
with Extended Harness for Trucks
