4
1. GETTING STARTED
To get your pedal up and running you need a standard 9V DC, 2.1 mm plug, center negative power
supply (minimum 250 mA). You will find the connector at the back of your pedal.
The pedal supports both mono and stereo connections. Combinations of these will lead to
different properties in the output signal. See the 7. Input/output setups section (page 11) for
further explanations.
2. CONTROLS
SPEED
Adjust the speed of the tremolo effect
SHAPE
Change between a mild sine wave tremolo (lowest setting), a more
aggressive square wave tremolo (highest setting) or a mix between
sine and square wave.
DEPTH
Adjust the amplitude of the tremolo effect, the “degree” of tremolo
effect. Depth set to minimum equals no tremolo effect
FX SELECT/TAP TEMPO
Two modes:
-‐
TAP – tap the desired tremolo speed* using footswitch (TAP)
-‐
FX-‐SELECT – Choose active effect parameter (
TIME, LEVEL or
FEEDBACK
) for wireless control with AERO controller
