aakar AAKARv2, Руководство пользователя

Страница: 42 / 45

TERMINOLOGY
ABS filament : This is a well-known plastic known for its
strength and industrial properties.
Build plate : The frame that supports the glass print plate.
Cura : Open Source Software that allows you to turn your
3D model into a printable file.
Display : The LCD display provides the menu for controlling
the Aakar v2.
Filament guide tube : The plastic tube that guides the
filament from the filament spool to the print head.
Firmware : The software that runs on the electronic board.
Axis : The construction of metal rods that allow movements
in x,y and z direction.
G - code : The code that comes out of the slicing process of a
3D model in Cura. It describes the movements of your print
head.
Drive gear : Gives grip to push the filament in the
filament guide tube.
Nozzle : The opening at the end of the print head. The
filament gets pushed through the opening and will
deposited on your build plate.
PLA filament : This is a hard bioplastic that has a low
environmental impact. It is derived from renewable, starch-
based resources. It has a very low shrinkage which is helpful
for large prints.