aakar AAKARv2, Руководство пользователя

Страница: 33 / 45

Closest to nozzle to move the bed up or down so it is just
touching the nozzle.
When you are finished with this corner, select the [Resume]
button in cura. This will move the head to the next corner.
Repeat this step for all corners.
When you have material inserted your Extruder, you
should select the [Resume] button again and now your
Aakar v2 printhead will heat up and print a square in lines
to show and check that your build plate is level and the
material sticks to it.