68
PCM-5894 User's Manual
OS/2
These drivers are designed to function with the OS/2 Version 4.0, 3.0
and 2.11 operating systems.
To install this driver, do the following steps:
1. Open an OS/2 full screen or windowed session.
2. Place the 65554 Display Driver diskette in drive A.
3. At the OS/2 command prompt, type the following commands to
copy the files to the OS/2 drive:
Type A:<ENTER> to make this default drive.
Type SETUP A: C:<ENTER>
Where A: is the floppy disk drive and
C: is hard disk partition containing \ OS2
When the Setup Program is completed, you will need to perform a
shutdown and then restart the system in order for changes to take
effect.
A log of the information output during the install can be found
in <root>:\OS2\INSTALL\DISPLAY.LOG
4. After restarting the system, perform the following steps:
1. Open the OS/2 System folder.
2. Open the System Setup folder.
3. Open the Display Driver Install Object
This step will execute the Display Driver Installation (DSPINSTL)
utility program to finish installation of the new drivers.
4. When the Display Driver Install window appears, select
Primary Displsy and then select OK.
5. When The Primary Display Driver List window appears, select
"Chips and Technologies 65554" from the list of adapter types,
then select OK or install the video driver.
Содержание PCM-5894
