![background image](http://html1.mh-extra.com/html/aaeon/pcm-5894/pcm-5894_user-manual_3326663075.webp)
Chapter 4 Driver Installation
67
Windows 3.1
These drivers are designed to work with Microsoft Windows Version
3.1. You should install these drivers through Windows.
Driver installation
1. Install Windows as you normally would for a VGA display. Run
Windows to make sure that it is working correctly.
2. Place the Win31 Driver Diskette in drive A. In Windows Program
Manager, choose File from the Options Menu. Then from the
pull-down menu, choose Run. At the Command Line prompt, type
A:\SETUP. Press the <ENTER> key or click OK to begin the
installation.
At this point the setup program locates the directory where Windows
is installed. For proper operation, the drivers must be installed
in the Windows subdirectory.
3. Press <ENTER> to complete the installation. Once completed,
you can find the icon Chips CPL under the Control Panel. The
icon Panel allows you to select and load the installed drivers.
Another method of installing these drivers is through the File
Manager. Click on Drive A:, and then double-click on
WINSETUP.EXE to begin installation.
Ô
Ô
Ô
Ô
Ô
Содержание PCM-5894
