AAA IONJET2000, Руководство пользователя и по обслуживанию

Страница: 26 / 76

26
3.2 AAVI
®
IONJET2000 STATUS LEDS
The AAVI
®
IonJet2000 air purifier indicates its internal state via status lights – Green, Yellow and
Red. Even though AAVI
®
IonJet2000 is serviced only by an authorized AAVI service personnel, it
is important that the user understands the meanings of the status lights. The status lights indicate
when service or maintenance is needed.
Please notice that the status lights can only indicate one state at one time. If multiple status states
are active only the most significant state is shown. The list below shows the order from the least
significant to the most significant (top to down = least to most).
3.2.1 Green OFF, Yellow OFF, Red OFF
The AAVI
®
IonJet2000 purifier is not switched ON.
3.2.2 Green ON, Yellow ON, Red ON
The automation turns ON all status lights for few seconds at power
-up phase to indicate that the lights are operational.
3.2.3 Green ON
The AAVI
®
IonJet2000 purifier is ON.
Neither service nor maintenance is needed.
3.2.4 Green ON, Yellow BLINKING
AAVI
®
IonJet2000 purifier is ON but service, manual cleaning, is needed.
This state is activated by a timer.
3.2. 5 Green ON and Yellow ON
AAVI
®
IonJet2000 purifier is OFF state for pre-set times for saving energy during the weekends
and nights. In energy saving mode both the purification and fan are not operating.
3.2.6 Green ON, Yellow and Red BLINKING IN TURNS
When AAVI
®
IonJet2000 is turned ON and if high voltage units’ temperature is below threshold
level the automation system activates preheating state. The purification stays in OFF state until
the high voltage units’ temperature increase to preset level.