34
User Manual
Copyright ©2003 A7 Engineering, Inc.
SERIN 0,84,[WAIT(CR,”>”)]
DEBUG “Disconnected”,CR
The BASIC Stamp application establishes a connection with the remote Bluetooth
device, waits twenty seconds, switches back to command mode and then
disconnects from the remote device.
5.
On the
File
menu, click
Save As
.
6.
In the
File name
box, enter a file name to which to save the program just created.
For example, ConnectPC.bs2.
7.
Click
Save
.
Step 4: Connect the eb500 on the Board of Education to the PC
1.
Apply
power
to the
Board of Education board
.
Power can be applied by attaching a 9 Volt battery, or the AC-Adapter provided by
Parallax.
2.
On the
Run
menu, click
Run
.
The Connection Status LED (Figure 1) on the eb500 module will turn on when a
connection is established. Additionally, on the My Bluetooth Places window, in the
Additional Information column, the text “Connected” will be shown while a connection
exists between the eb500 and the PC.
