26
User Manual
Copyright ©2003 A7 Engineering, Inc.
10.
In the
Flow control
dropdown, select
None
.
11.
Click
OK
.
This will establish a connection with the serial port.
12.
On the
Call
menu, click
Disconnect
.
This will disconnect the connection just established, so that we can modify the
connection properties in the following actions.
13.
On the
File
menu, click
Properties
.
This will display the Properties dialog.
14.
On the
Settings
tab, click
ASCII Setup
.
This will display the ASCII Setup dialog.
15.
Check the
Send line ends with line feeds
checkbox.
16.
Check the
Echo typed characters locally
checkbox.
17.
Check the
Append line feeds to incoming line ends
checkbox.
18.
Check the
Wrap lines that exceed terminal width
checkbox.
19.
Click
OK
.
This will return to the Properties dialog.
20.
Click
OK
.
21.
On the
Call
menu, click
Call
.
This will establish a connection with the serial port.
Step 3: Board of Education – eb500 Setup
In this step we will attach an eb500 module to the Board of Education board and
apply power to the device.
1.
Insert an
eb500
module into the
AppMod header
of the Board of Education board;
assuring that Pin 1 of the eb500 module is inserted into the VSS pin of the AppMod
header.
2.
Apply
power
to the
Board of Education board
.
Power can be applied by attaching a 9 Volt battery, or the AC-Adapter provided by
Parallax.
