EmbeddedBlue 500
27
Copyright ©2003 A7 Engineering, Inc.
Step 4: Establish a Connection
In this step we will establish a connection between the PC and the Board of
Education.
1.
Using HyperTerminal, get the address of the
eb500
module that is connected to the
Board of Education board by using the eb500
LST
serial command.
By issuing the LST command, the eb500 connected to the eb600 lists other
Bluetooth devices that are in range and visible. Please note that this operation will
take 30 seconds to complete.
To obtain the address, type
lst
at the “
>
” prompt and press the return key.
Example:
>lst
ACK
00:0C:84:00:07:D7
>
2.
Using HyperTerminal, establish a connection with the
eb500
that is connected to the
Board of Education board by using the eb500
CON
serial command.
To establish a connection, type
con
followed by a space, followed by the address
returned in the previous action, followed by a carriage-return. The Connection Status
LED (Figure 1) on both eb500 modules will turn on when a connection is established.
Example:
>con 00:0C:84:00:07:D7
ACK
>
3.
Disconnect
power
from both the
eb600 PC Adapter
and the
Board of Education
boards
.
The removal of power resets the eb500 so that when power is restored the eb500
will boot into command mode.
