15
English
4.2.6 IPTV settings
This menu allows for settings
required to transmit a digital-TV
transport stream as IPTV. IPTV
output is optional and can be
ordered separately.
Note!
To avoid overload it’s not recommended to run other RF
output at the same time i.e. choose ASI as Output. The
choosen bitrate will be the same on the ASI output
For IPTV out you have to set [UDP/RTP] values for Port and Address, e.g.: IP
address 239.192.0.10 and Port 1234. In the ”Bitrate” box you can choose bitrate
for the IPTV TS out. The maximum value is 55Mb/s. Click [Set bitrate] to save
settings. Click [Start] to start IPTV streaming on the output (RJ 45 connector). To
check the IPTV out signal, use VLC Player or similar. We recommend you to visit
our website
www.a2b.se
for updated info about this function
.
4. Settings (continued)
4.2.7 CI and Smart card information
This menu allows you to view
information about your CA-system
and current subscriptions.
