a2b ACCORRONI MEC MIX C Series, Техническая информация

Страница: 33 / 52

33
INSTALLATION TYPE C33 - ROOF COAXIL EXHAUST FUMES Ø 60/100
Fig. 27
Mod.
35
45
COAXIAL TUBE
12
12
INSTALLATION TYPE B23 - ROOF EXHAUST FUMES Ø 80
Fig. 25
MAXIMUM ADMISSION LENGTHS (m)
MAXIMUM ADMISSION LENGTHS (m)
MAXIMUM ADMISSION LENGTHS (m)
Mod.
35
45
FUMES TUBE
FUMES TUBE
34
34
INSTALLATION TYPE B23 - ROOF EXHAUST FUMES Ø 60
Fig. 26
Mod.
35
45 24
24
WARNING!
the aforesaid lengths are to be understood in the case of installations in which
the air tube and the flue pipe carry out a linear path as shown in the figure.
Otherwise it is necessary to proceed with the calculation of the load loss check
(see EXAMPLE OF CALCULATION).
WARNING!
the aforesaid lengths are to be understood in the case of installations in which
the air tube and the flue pipe carry out a linear path as shown in the figure.
Otherwise it is necessary to proceed with the calculation of the load loss check
(see EXAMPLE OF CALCULATION).
WARNING!
the aforesaid lengths are to be understood in the case of installations in which
the air tube and the flue pipe carry out a linear path as shown in the figure.
Otherwise it is necessary to proceed with the calculation of the load loss check
(see EXAMPLE OF CALCULATION).
INSTALLATION TYPE C53 - SEPARATED WALL TUBES Ø 80
Fig. 22
MAXIMUM ADMISSION LENGTHS (m)
MAXIMUM ADMISSION LENGTHS (m)
MAXIMUM ADMISSION LENGTHS (m)
Mod.
35
45
AIR PIPE
34
34
FUMES TUBE
FUMES TUBE
FUMES TUBE
34
34
INSTALLATION TYPE B23 - TUBES Ø 60
Fig. 23
Mod.
35
45 24
24
INSTALLATION TYPE B23 - TUBES Ø 80
Fig. 24
Mod.
35
45 34
34
WARNING!
the aforesaid lengths are to be understood in the case of installations in which
the air tube and the flue pipe carry out a linear path as shown in the figure.
Otherwise it is necessary to proceed with the calculation of the load loss check
(see EXAMPLE OF CALCULATION).
WARNING!
the aforesaid lengths are to be understood in the case of installations in which
the air tube and the flue pipe carry out a linear path as shown in the figure.
Otherwise it is necessary to proceed with the calculation of the load loss check
(see EXAMPLE OF CALCULATION).
WARNING!
the aforesaid lengths are to be understood in the case of installations in which
the air tube and the flue pipe carry out a linear path as shown in the figure.
Otherwise it is necessary to proceed with the calculation of the load loss check
(see EXAMPLE OF CALCULATION).