6
1.CARATTERISTICHE PRINCIPALI
1.1
CLASSIFICATION OF THE APPLIANCES
The
fundamental elements that make up the system
HUB RADIATOR DHP
are
:
-
the covering unit of the outdoor unit is made for all
sheet metal models
pre-painted with epoxy powder. The room
compressor is completely isolated from the air /
refrigerant exchanger compartment; it allows to
better protect the electromechanical components;
-
the compressor is of the high rotary type
efficiency, working with R 410A refrigerant,
mounted on elastic anti-vibration mounts, operated
from single-phase electric motor for all models;
-
the air / refrigerant gas exchanger
it is made with copper pipes and aluminium fins
blocked by mechanical expansion of the
tubes, with high heat exchange surface;
1.4 CONTENT OF THE PACKAGING
The appliance is shipped on a wooden pallet, with
protections in extruded and wrapped polystyrene
foam in a layer of plastic fabric with air bubbles.
The identification data of the appliance are shown
both on the label on the packaging and on the data
plate applied to the inside of the cover cabinet.
Do not remove the license plate for any reason
technical data, since the references contained
therein are necessary for any interventions of
maintenance.
Inside the package there is also an
envelope containing this manual and the certificate
of guarantee, which must be delivered to owner of
the appliance to keep them carefully for any future
use or for consultation.
1) Electronic evaporator motorcycles
defined as: “Monoblock air heat pump
split water ”, fed by cooling fluid
R410A with 3.0 - 7.8 kW ON - OFF compressor.
2) Internal unit defined as accumulator radiator
high performance closed circuit that holds
completely separated the technical water from the
water
sanitary and is realized through 2 accumulations
sequential cylindrical section, inside the
which all copper exchangers are positioned.
1.2 CERTIFICATIONS - CE MARKING
The patented HUB RADIATOR DHP system is
compliant with directives 97/23 / EC and 98/37 / EEC.
They also comply with the provisions of the
following the directives: 73/23 / CEE, 89/336 / CEE,
as amended by Directive 93/68 / EEC.
The internal unit of the HUB RADIATOR DHP system
has been designed to be installed only and
exclusively inside the buildings or on special purpose
external niche thermally insulated and protected by
the
atmospheric agents, if not respected
this indication invalidates any type of warranty
warranty.
1.3 CONSTRUCTION CHARACTERISTICS
All cars are equipped with
microprocessors for control and adjustments of
operation and safety of the units.
The products of the HUB RADIATOR DHP series
thanks to the
patented direct exchange capacitors are able to
achieve high standards of energy efficiency
and SCOP.
Other construction features:
- the ventilating unit consists of a fan
helical driven directly by engine
single phase asynchronous with thermal
protection
internal. The fan is equipped with a grill
accident prevention protection;
- the rapid exchanger DHW, is made in
copper directly immersed in technical water
of the indoor unit with the FIRST IN - FIRST
method
OUT, so as to eliminate the problem of legionella.
- the refrigeration circuit and the connections
between the
individual components are made of
specific copper for refrigeration. They are part of
the
refrigeration circuit the rolling member, the
reverse cycle valve and the liquid separator;
- the electric command and control panel is
made of white ABS with a degree of protection
IP 56 is directly positioned inside the
cover cabinet.
- the microprocessor control system with
keyboard is located on the control panel
accessible directly on the part
front of the cover cabinet, and can
be remoted using the appropriate panel
command and remote control, available
as an accessory, to be installed on the wall
or collection.
- the indoor unit is supplied complete with all
the special internal copper exchangers,
freon connections, DHW connections, valve
air vent jolly, safety valve, automatic filling,
pressure gauge, valve diverter to give priority to
healthcare, electronic circulator, vessel of
expansion, temperature probes.
