39
Terminal
Regarding the use of the remote terminal
(indications on the display and meaning of the keys)
do reference to the preceding paragraphs. In air / air
units, in case of terminal use remote equipped with
NTC probe (VICXS610), configuring par. CF35 = 2
the display will show the room air temperature; this
probe will be used from the controller for
temperature control. In case of controller / remote
terminal failure or error in the wiring, the lack of
communication between the instrument and the
remote terminal will be signaled to display with the
error message "noL" (no link).
15.5
ACCESS TO PARAMETERS
1
Press the SET and arrow keys for a few seconds
downward;
2
The
icon
s
flash and the display
upper displays "ALL" (generic group of
parameters);
3 Scroll through the parameter groups with the and
keys
select the group containing the parameters from
modify; pressing the set button allows you to
access the list of parameters contained in the
group. The lower display shows the label of the
parameter and the upper display shows the
value.
15.6 DISPLAY AND MODIFY THE SET POINT
Pressing and releasing the SET key allows the
display of the set point.
The prolonged pressing of the SET key allows the
its modification:
1 Press the SET button for at least 3 seconds;
2 The set point will be displayed flashing;
3
To change the value, use the and keys
e
4
Save the new set point by pressing the key
SET or wait for the time out time to exit
from the program.
