14
2)
CHOICE OF ANTI-VIBRATION SUPPORTS TO MAKE OBLIGATORY ON THE ARMS
OF SUPPORTING THE OUTDOOR UNIT, OR ON THE FLOOR IF STORED TO THE GROUND WITH
ANTI-VIBRATION FLOOR BASE
N.B.
. it is advisable to place the outdoor unit where possible, always resting on the ground.
Anti-vibration mount on shelf
anti-vibration kit
Anti-vibration support on the floor
anti-vibration floor base
Codice 75100021
Codice 75100018
3) IN THE POSITION OF INSTALLATION ON A SHELF, AVOID FIXING ON
EXTERNAL WALLS OF THE NIGHT AREA AND AVOID FIXING THE SHELF IN
PROXIMITY OF BEAMS OR PILLARS THAT MAY GENERATE ALSO VIBRATIONS
INSIDE THE BUILDING.
YOU MUST ALWAYS APPLY RUBBER BANDS (THICKNESS 3 mm) HOW
ANTI-VIBRATION BETWEEN THE SHELF AND THE WALL OF THE EXTERNAL WALL.
THE SUPPORT BRACKETS MUST ALWAYS BE INSTALLED IN PERFECT
LEVELING DISTANCE FROM THE BOTTOM WALL OF ABOUT 15 cm.
4) APPLICATION OF DAMPING MASSES ON REFRIGERANT GAS PIPES THAT
THEY MAY GENERATE VIBRATIONS BY SENDING THE SYSTEM TO RESONANCE.
IN RELATION TO THE REFRIGERANT GAS PIPE, MAKE SURE THAT THE CHARGE
DI GAS IS ALWAYS CORRECT AS SHOWN ON TARGA DATA.
THE EXTERNAL UNIT TOO MUCH OF GAS GENERATES AN INCREASE OF ABSORPTION
ELECTRIC AND AN INCREASE OF NOISE INDUCED INDIVIDUAL COMPRESSOR.
5) IT IS NECESSARY TO REMEMBER THAT THE PERCEPTION OF THE NOISE DEPENDS VERY MUCH
NOISE LEVEL PRESENT IN THE AREA.
FROM SPECIFIC STUDIES MADE BETWEEN THE DAY AND THE NIGHT PERIOD LA
PERCEPTION OF THE SAME NOISE INCREASES BY 10 dB (A) WHEN THE OUTDOOR UNIT
WORK IN NIGHT HOURS.
IT IS RECOMMENDED FOR THIS PURPOSE TO INSTALL A CLOCK KIT THAT ALLOWS YOU TO
AVOID THE OPERATION OF THE EXTERNAL UNIT AT FULL NIGHT
(SEE CODE 35639900 ACCORRONI TECHNOLOGY).
6) THE PERCEPTION OF THE NOISE IS SUBJECTIVE AND VARIES ACCORDING TO THE THRESHOLD OF
INDIVIDUAL TOLERABILITY AND BASED ON THE DISTANCE BETWEEN THE ISSUE SOURCE
AND THE RECEIVER.
