User manual Multibox6T International
655603.03 rev A
Page 3
2
Introduction
Thank you for choosing the Multibox 6T International, a quality product developed and
manufactured by A2B Electronics.
The Multibox is a unique solution that allows you to watch digital television on all TV sets.
The Multibox receives all terrestrial free to air programs, and retransmits 6 channels
simultaneously to all TV sets and VCRs, that are connected to the analogue distribution
system.
This User Manual describes how to install and connect the Multibox quickly and easily.
Installers may wish to refer to the Quick Guide for a brief description of how to get started.
In the unlikely event that you experience any difficulties please refer to Chapter 11, Support
and Trouble Shooting.
3
Information about digital terrestrial television
Today there are many digital terrestrial channels available that are broadcasted free to air.
The Multibox is a unique solution that makes it possible to continue watching TV on all the
TV sets even after Digital Switchover. The Multibox can receive all free digital terrestrial
channels.
The free to air channels are transmitted in muxes. A mux (multiplex) is a package of
channels that are transmitted on the same frequency. Frequently a mux will contain both
free to air and pay TV channels.
The Multibox receives transmissions from 4 muxes, and retransmits 6 of the free to air
channels in analogue form with Nicam/A2 stereo to all connected receivers (TV-sets, VCR’s
etc.). In the Multibox there is also a loop through of all digital muxes , which makes it
possible to connect a Set Top Box (STB) for Pay-TV after the Multibox. For more information
please refer to
www.a2b.se
4
Mounting (where and how to mount the Multibox)
The Multibox should be mounted correctly to ensure
excellent performance over a long period of time.
Please note that it is important to mount the Multibox
vertically for correct airflow. Attach the Multibox to a
suitable surface either by using the holes on the back
side or the ones on the left or the right side. We
recommend that you use the attached drilling pattern
for drilling, and use 2 screws (length depending on Surface)
