User manual Multibox6T International
655603.03 rev A
Page 4
Mount the Multibox so that it is as easy as possible to connect the cables. If the Multibox is
installed in the attic, mount it close to the aerial. Also, make sure you have a 230V AC power
outlet. For more information about how to install the Multibox please refer to Chapter 6
Installation.
5
Connectors and buttons
Connectors and buttons
1.
Aerial in
2.
TV out
3.
DC-power (12 V)
4.
RS-232 Serial port for updates
1)
and
communication between units
5.
LED operation indicator
6.
Arrow up for menu navigation
7.
Arrow down for menu navigation
8.
OK button for showing menus and
for menu choice
1) See
www.a2b.se
for information about new software.
6
Installation
6.1
Installation in a MATV network
The Multibox should be connected as close as
possible after the aerial and after an antenna
amplifier where necessary (if for example there is a
very long cable from the aerial or the aerial signal is
weak). The output signal of the Multibox should be
connected into the existing network and if necessary
to an amplifier.
(The output level from the Multibox is typ. 80 dBuV)
Note!
Do not use any other power adaptor than the
original with the Multibox.
1
2
3
4
5
6
7
8
TV
TV
TV
TV
Multibox
Splitt
er
