www.a-ts.cn A-TS Technology
FT50
16
Overload capacity
Continuous current allowing 150% of the rated current for
60s every 300s.
Continuous current allowing 180% of the rated current for
5s every 300s.
Carrier frequency
1kHz - 8kHz
Frequency
resolution setting
Digital Setting: 0.01Hz
Analog Setting: Maximum Frequency*0.025%
Analog input
Standard configuration: 2 analog input channels,
0-10V/0-20mA, equipped with +10V, 50mA auxiliary power
supply.
Extended configuration: 1 analog input channel,
0-10V/0-20mA, 1 channel supports PT100/PT1000/KTY84
sensor for Motor over temperature protection.
Analog output
Standard configuration: 1 analog output channel, 0 - 10V/0 -
20mA.
Extended configuration: 1 analog output channel, 0 - 10V/0
- 20mA.
Digital (on-off)
input
Standard configuration: 6 bipolar digital (on-off) input
channels, compatible with active PNP or passive NPN
input. One of them can be used as high-speed pulse input,
the input frequency is up to 100kHz.
Extended configuration: 5 digital (on-off) input channels
Digital (on-off)
output
Standard configuration: 1 high-speed pulse output (optional
to be open collector output), 0 - 100kHz square signal
output, 1 digital (on-off) output channel, maximum output
50mA/24V DC.
Extended configuration: 1 digital (on-off) output channel,
maximum output 50mA/24V DC.
Relay output
Standard configuration: 2 relay output channels, 1A/30V
DC, 3A/250V AC
Extended configuration: 1 relay output channels, 1A/30V
DC, 3A/250V AC
Encoder interface
Supports differential signal, open collector signal, push-pull
signal, etc.
Communication
PROFIBUS-DP, PROFINET-IO, Modbus RTU, Drive to
drive through optical fiber, etc.
Protective function
Over/Under voltage protection, Over current protection,
overload protection, Phase-failure protection (Input and
output), Short circuit protection, Motor over temperature
protection, Motor overspeed protection, No load protection,
Short-circuit braking protection, Braking resistor
short-circuit detection, External DC24V short circuit
protection, etc.
