Page 24 09/2021
User Manual Wallbox home, home plus,
home plus with charging socket and business
Fig.6-7 Pick off the charging
connector (Case C socket)
6.2.5. Emergency stop button
This button is used to stop charging in case of emergency.
At any time, in case of any emergency (such as fire, smoke, abnormal noise, water
inflow, etc.), on the premise of ensuring personal safety, please press this button, and
immediately stay away from the charging station.
6.2.6. Charging Port & Type2 Plug Holder
The a-Tronix series AC EV charging station has a type 2 charging connector.
When the charging station is in standby mode, insert the charging plug into the type 2
holder to protect the charging plug.
6.3. Start charging
6.3.1. Case C socket
a) Park the electric car, switch off the engine and apply the
handbrake.
b) Take the charging adapter out of the holder as in Fig. 6-7.
c) Plug the charging adapter into the mains socket of the
electric vehicle and the „Connect“ LED of the charging
station lights up.
d) When the charging indicator starts flashing, the unit switches to the charging state.
6.3.2. Case C socket
e) Park the electric car, switch off the engine and apply the handbrake.
f) Users usually bring their own dual-connector charging cable
(shown as Fig. 6-7-1, one connector is a type 2 male connector meet IEC 62196-2).
Fig. 6-7-1 Dual-connector
charging cable
(Case B socket)
g) Plug the male connector into the charging station socket. And then plug another
charging connector into the AC charging socket of the electric vehicle and the
„Connect“ light of the charging station will be lit.
h) For „plug-and-charge“ charging station, it will automatically enter the charging process;
for „swipe card-controlled“ charging station, it needs to swipe card to start; for APP-
controlled charging station, it needs to operate mobile phone to start.
i) When the „Charging“ light begins to flash, the pile will enter the charging state.