09/2021
Page 17
User Manual Wallbox home, home plus,
home plus with charging socket and business
5.3.2. Tools for installation
Prepare the following tools at least before installing your a-TroniX AC EV-charging station:
No. Tool
Schematic Picture
Main Uses
Check the
1 Multimeter
electrical connection and
measure the voltage
2 Electric Impact drill
Drill fixing holes in the wall
3 Wrech
Fastening bolt
4 Diagonal pliers
Cut the cable
5 Wire stripper
Peeling cables
6 Crimping pliers
Pressed cable terminal
7 Cross screwdriver
Fastening screw
5.3.3. Ambient
For further safety instructions, see section 2
For further environmental conditions, see section 4.4.4.
a. It is suggested that the charging station should be installed in a place with good
ventilation, no direct sunlight and shelter from wind and rain.
b. In order to ensure good ventilation condition, you should mount the charging station
vertically and leave enough space.
c. Mounted the a-TroniX Wallbox on the wall is shown in Fig.5-1 and 5-1-1.
d. If you purchase products with floor mounted accessories, the installation effect is
similar to that of wall mounted product.