A.O. Smith HSE-SBS-015, Руководство пользователя

Страница: 11 / 20

7
temperature. While setting, the temperature indicators glow as
shown in Fig. 12.
Note:
•
Default set temperature (factory setting) is 70°C.
4. Energy meter
The “ENERGY METER” key is used to display the energy
consumed by water heater for 5 seconds in kWh. The new
value will be added to the consumed value and displays the
total consumed value. The energy meter value displayed is
cumulative. The display indicators glow as shown in Fig. 13.
Note:
• Energy Meter values are indicative only.
• Refer 6.
Reset function to reset the Energy Meter.
5. Modes
There are two types of modes depending on the actual water
temperature inside the inner tank of the water heater:
a. Heating mode
When the actual temperature of the water is less than the
set temperature, it enters into Heating mode. The indicator
glows as shown in Fig. 14.
b. Standby mode
After the water heater reaches set temperature, it will enter
into the Standby mode due the cut-off power and the
indicators will glow as shown in Fig. 15.
When the temperature of the water drops by 5°C from the set
temperature due to usage of water, it again cycles the modes.
6. Reset function
By pressing “ENERGY METER” and ”  ” keys continuously for
5 seconds, the changed set temperature and the energy meter
value will be restored to factory settings (set temperature value
is made 70°C and energy meter value resets to 0 kWh) and
water heater goes into initial power state. While resetting in
the display, all screen indicators will glow up for a while and
goes off as shown in Fig. 10.
2kW C kWh
HE ATING SET
Fig. 15
2kW C kWh
HE ATING SET
Fig. 13
2kW C
kWh
HE ATING SET
Fig. 14
2kW C kWh
HE ATING SET
Fig. 12