6
.
.
Notice:
Mounting Procedures and Precautions
z
.
.
z
z
The heater should not be located outdoors or in a freezing environment. If freezing occurs, the
tank and water pipe may break, therefore be in the risk of scalds or leakage.
z
The heater could be installed in half-hidden style. Refer to Fig.3
Fig.3 Installation
z
Using an inner hexangular spanner and expansion screw to fix hook on wall.
z
Using an inner hexangular spanner and expansion screw to fix hook on wall.
50mm
Water Heater
Gusset Plate
Movable Gusset Plate
Movable Gusset Plate
should be available as water may be discharged through relief valve or discharge pipe during the
operation of the system. The installation place should ensure no damage to surroundings or downs-
tairs in case of leakage of heater or joint. Make sure to install inlet, outlet and discharge pipe under
the heater.
Vertical installation of the water heater is strictly prohibited.
Make sure to use original accessories to install the heater. Do not mount the heater
until accessories are fixed on wall, or it may fall down and cause accident.
Independent branch of circuit with diameter of wire no less than 2.5mm is
suggested, as max input power of the heater is 2.5kW.
Ensure mounting wall can afford at least four times the weight of the heat pump water heater
full of water. Corresponding protective measures such as bracket is essential when install on
nonbearing wall.
In order to easily open side cover for maintenance or resetting high temp limit switch and for
fine air movement required by heat pump system, please ensure 300 mm (at least 50mm) or
more distance between wall and right side of heater, between which there should also be no
curtain, towel and anything that could be moved by blow. If the heater is embedded into a
gusset plate, the plate on the right side should be moveable for easy repair and maintenance.
Refer to Fig.3 for details.
