9
Notice:
-
Water Filling
Remote Controller
User could fix remote controller on the wall near the heater with bracket if needed.
Remote Controller Bracket Installation
z
Remote controller bracket should be located at a dry place.
.
z
Fitremote controller with battery into the bracket.
Remote Controller Battery Installation
z
Use a coin to remove battery cover in back of controller in anticlockwise direction.
z
Use a coin to fix battery cover in clockwise direction.
z
Put CR2025 battery (in accessories) into controller, with "+" polar upwards.
2SH
Q
&ORVH
&59
%DWWHU\6L]H
5RWDWHDIWHUSUHVVLQJ
2SHQFORVHE\DFRLQ
2S
HQ
&OR
VH
&59
%DWWHU\6L]H
5RW
DWH
DIWHUS
UHV
VLQJ
2SHQ
FORV
HE\
DFR
LQ
2S
HQ
&OR
VH
&59
%DWWHU\6L]H
5RWD
WH
DIWHU
SUHV
VLQJ
2SHQ
FORV
HE\
DFR
LQ
2SHQ
&ORVH
&59
%DWWHU\6L]H
5RWDWHDIWHUSUHVVLQJ
2SHQFORVHE\DFRLQ
Fig.8
z
8VLQJLPSDFWHOHFWULFGULOOZLWKĭPPGULOOPDNHWZRKRUL]RQWDOSXQFKLQJEHWZHHQZKLFKWKH
distance should be 28mm (Refers to Fig.8). Use expansion pipes and screws (in accessories) to
fix bracket on the wall..
Ensure that the heater and socket are both reliably grounded. Use an independent
KLJKTXDOLW\VRFNHWZLWKUDWHGPD[FXUUHQWQROHVVWKDQ$(QVXUHUHOLDEOHFRQWDFW
between plug and socket.
$IWHUDOOWKHSLSHVFRQQHFWLRQRSHQWKHRXWOHWYDOYHRIWKHKHDWHUDQGWKHQWKHLQOHWYDOYH)LOOKHDWHU
tank with water until water flowing smoothly through outlet pipe, which means the tank is full of
water. Shut off the outlet valve, and check if there is any leakage at joints. If yes, evacuate the tank,
fix joints and repeat until no leakage appears.
