A.O. Smith FREZYA 300 Series, Руководство пользователя

Страница: 17 / 48

ENG 15
2. Setting up Hot Water Function
2.1.Turn on the hot water switch on the rear of the unit.
2.2.When the switch is on, “Hot Water/Lockout” lamp will be on.
2.3.After hot water function starts to work, it takes 20 mins to get
sufficiently heated water. Wait for 20 minutes and after that hot water
intake is possible (at first).
2.4.At the first operation, dump 20 liters water before start to use the
unit.
2.5.After Hot Water Function is on, the unit will automatically control
the hot water temperature and keep it between 83-85.
WARNING: While plugging in, if the Hot Water Switch was on, then
the device will emit a thermostat. In such a case thermostat should
be reset. During reset the device should not be connected to the pow
er supply. Otherwise there a risk of electric shock.
NOTE: It is possible to save energy by turning off hot water switch and
take room temperature water in summer time.
3. Setting up Cold Water Function
3.1.Turn on the cold water switch on the rear of the unit.
3.2.When the switch is on, “Cold Water/Lockout” lamp will be on.
3.3.After cold water function starts to work, it takes 90 mins to get
sufficiently cooled water. Wait for 90 minutes and after that hot water
intake is possible (at first).
3.4.At the first operation, dump 20 liters water before start to use the
unit.
3.5.After Cold Water Function is on, the unit will automatically control
the cold water temperature and keep it between 4-12.
NOTE:
It is possible to save energy by turning off cold water switch and
take room temperature water in winter time.
4. Getting Water from Frezya 300
4.1. To intake hot water, first press the Hot Safety Button then press the
hot water faucet.
4.2. After the initial installation, dump over 20 liters of purified water.
Then you may start using your device.
4.3. To intake cold water, press only the cold water faucet.
4.4. To get continuous cold water to fill larger containers like Kettle,
beaker or pan, lift the cold water faucet forward and upward.
4.5. If you did not use the unit for a long time, dump 1-2 liters.
HOT WATER
SAFETY DEVICE
(ON)
(OFF)
COLD WATER
(ON)
(OFF)
Diagram 7
Diagram 8
Diagram 9
Safety
Button
Hot Water
Faucet
Cold
Water
Hot
Water
Safety
Device